Bender ISOMETER iso1685DP Скачать руководство пользователя страница 30

Страница: 30 / 56

iso1685DP_D00272_02_M_XXEN/07.2017

Settings

9. Settings

The settings of the ISOMETER® are explained in the order of the device menu.

9.1

1.0 Alarm settings

The limit values for the insulation resistances of alarm 1 and alarm 2 can be specified in
the alarm settings menu and adjusted to the profile of the ISOMETER®. If you have acti-
vated the password query in the device menu (refer to

“Password” auf Seite 39

), you must

enter the device password in order to change the settings.
You can adjust the following functions:

9.1

(1.1) Insulation alarm

In the Insulation alarm menu, the ISOMETER® limit values for alarm 1 and alarm 2 can be
set. Activation or deactivation of the two alarm levels

an1

(alarm 1) and

an2

(alarm 2) are

illustrated in the following graphic:
An alarm will become inactive as soon as the hysteresis of the set operating value is ex-
ceeded.

9.1

(1.1.1) Alarm 1

An insulation resistance of 0.2 kΩ…1 MΩ can be set for alarm 1.
Condition: alarm 1 ≥ alarm 2.

9.1

(1.1.2) Alarm 2

An insulation resistance of 0.2 kΩ…2 MΩ can be set for alarm 2.

an1

an2

Alarm 1

aktive

Alarm 2

aktive

hysteresis

Alarm 1

inaktive

hysteresis

Alarm 2

inaktive

9.1

(1.2) Profile

Adapt the area of application of the ISOMETER® to your system profile. For a description
of the profiles, refer to

“Device profiles” auf Seite 46

The following can be selected:

9.1

(1.3) Fault memory

Automatic reset of inactive faults at the outputs
(relays 11-12-13, 21-22-24, 31-32-34):

•Power circuits

Suitable for most IT systems.

•High capacitance

Suitable for system with high leakage capacitances.
Limit of the measuring range: 200 kΩ

•Inverter > 10 Hz

Suitable for systems with dynamic frequency control by
inverters in the range 10 to 460 Hz.

•Inverter < 10 Hz

Suitable for systems with extremely low frequency control
in the range 1…460 Hz.

•Fast 2000 μF

Suitable for systems with very high leakage capacitances,
e.g. in large-scale photovoltaic systems.
Limit of the measuring range: 50 kΩ

•on

If a fault becomes inactive, the programmed outputs remain
in fault condition until they are reset manually.

•off

If a fault becomes inactive, the programmed outputs auto-
matically change the state.

Содержание ISOMETER iso1685DP

























































Результаты поиска

Содержание ISOMETER iso1685DP

Отзывы:

Похожие инструкции для ISOMETER iso1685DP

Бренды по названию

Популярные бренды

Bender ISOMETER iso1685DP, Руководство пользователя

Результаты поиска

Содержание ISOMETER iso1685DP

Отзывы:

Похожие инструкции для ISOMETER iso1685DP

Бренды по названию

Популярные бренды