ben-e-bike TWENTY E-POWER 2020 Скачать руководство пользователя страница 2

Страница: 2 / 24

2 BEN-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

www.ben-e-bike.net
[email protected]

Dear parents,

This is only an extract of the complete manual of our BEN-E-BIKE's. The full version can be downloaded from our

website "www.ben-e-bike.net!

VALIDITY

This instruction manual is valid for BEN-E-BIKE's of model year 2020. The safety instructions for proper battery use

are explained at the end of this manual.

MARKING OF SAFETEY ADVICE

The purpose of warnings is to draw your attention to possible dangers. These warnings require your full attention

and understanding of the statements. Failure to follow a warning may result in injury to your child or others. The

warnings alone do not prevent hazards. You and your child should follow all warnings to avoid risks when using the

BEN-E-BIKE.

There are warnings in these instructions in the following classifications::

WARNING

The word "WARNING" indicates a hazard with a medium or high degree of risk, which, if not avoided, may result

in death or serious injury..

The Word „CAUTION“ indicates a hazard with a low level of risk which, if not avoided, may result in minor or

moderate injury.

The word „NOTE“ warns of possible material damage.

Содержание TWENTY E-POWER 2020

























Результаты поиска

Содержание TWENTY E-POWER 2020

Отзывы:

Похожие инструкции для TWENTY E-POWER 2020

Бренды по названию

Популярные бренды

ben-e-bike TWENTY E-POWER 2020, Руководство пользователя

Результаты поиска

Содержание TWENTY E-POWER 2020

Отзывы:

Похожие инструкции для TWENTY E-POWER 2020

Бренды по названию

Популярные бренды