ben-e-bike TWENTY E-POWER 2020 Скачать руководство пользователя страница 18

Страница: 18 / 24

18 BEN-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

www.ben-e-bike.net
[email protected]

The individual function blocks of the "MControl" software

After starting the software, you should first read out the controller so you can see what values are

stored there. At the same time, the software recognizes which type of battery is installed and adapts

the HMI accordingly.

This button should be used when you have "misaligned" all settings so that you are no longer satisfied

with the performance and want to start all over again.

If you have already saved your own settings on your PC, you can load them from your hard disk by

pressing this button.

If you have found the perfect setup, then you should not only store it in the controller of the Ben E-

bike, but also on the hard drive of your PC. After clicking the button, you can give the setup a name of

your choice and, if necessary, change the memory location on your hard drive.

Important: Saving the settings via the "Save setup" button

saves only the parameters on the hard disk of your PC - the values are not transferred to the controller

at the same time during this process. To do this, use the button described below!

All settings made in the user interface of this software do not take effect until they have been

transferred to the controller by pressing the "Program controller" button! If you quit the program

before pressing this button, the previous parameters in the controller remain unchanged!

Maximum assistance speed

This parameter defines the maximum speed up to which the motor should support. This value does

Содержание TWENTY E-POWER 2020

























Результаты поиска

Содержание TWENTY E-POWER 2020

Отзывы:

Похожие инструкции для TWENTY E-POWER 2020

Бренды по названию

Популярные бренды

ben-e-bike TWENTY E-POWER 2020, Руководство пользователя

Результаты поиска

Содержание TWENTY E-POWER 2020

Отзывы:

Похожие инструкции для TWENTY E-POWER 2020

Бренды по названию

Популярные бренды