12 BEN-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
www.ben-e-bike.net
[email protected]
d) Activating the "walk-assist"
Every BEN-E-BIKE is equipped with a so-called "walk-assist". This can be very convenient if the bike is
needs to be pushed up a hill that is so steep that your child can not drive it anymore. To do activate
the walk-assist, press the "-" button and keep it pressed. The walk-assist will be activated with a delay
of approx. one second. The button must be kept pressed in any case - otherwise the walk-assist will
stop immediately. The walk-assist supports up to a maximum speed of 6 km / h - if it is active, the
LED's of the right bar are illuminated one after the other.
The speed of the walk-assist can be adjusted via the PC software - the factory setting is 4 km/h.
e) Battery status
The left LED bar of the display indicates the charging status of the battery. If all five LED's light up, the
battery is fully charged:
If the battery is discharged while driving, the individual LEDs go out gradually. If only one LED lights
up, the battery is already so far discharged that only a few kilometres can be driven with motor
support. As soon as this last LED starts to flash, the battery is completely discharged and the motor
support is deactivated until the battery is recharged.
