Belshaw Bros., Inc.
•
www.belshaw.com
•
Phone 206-322-5474
•
Fax 206-322-5425
EZ18, EZ24, EZ34 OM
MN-1317EN
11
Figure 2-1. Removing the Heater Head.
(Place heater head as shown above so no
damage is done to the element.)
WARNING
Do not touch the heating element! It is very
hot and will burn you.
11. Remove the kettle from the frame. You
must remove it from the rear.
12. Pour any shortening remaining in the kettle
into a metal container. If it is too heavy or
awkward for you to lift by yourself, get
someone to help you.
WARNING
Thoroughly clean and dry the floor if
shortening, water, or other materials are
spilled. Materials spilled on the floor may
cause serious injury and loss of life.
13. Scrape out any residue and discard it.
14. Wash the kettle, the cube melter, and the
filter frame with warm, soapy water.
15. Dry all the parts completely. The kettle and
all other parts must be completely dry before
you use the EZ Melt again.
WARNING
Failure to dry the kettle and all parts of the EZ
Melt completely may cause shortening to
spatter or erupt. Shortening will overflow the
EZ Melt and may result in fire, injury, or
death.
16. Re-assemble the EZ Melt.