S TEP- BY -ST EP S UM M AR Y OF OPER AT IN G PRO CED URE S
Operating Steps
Detailed Information
Set-up
Make sure that you have all the
necessary supplies.
•
Make sure that the battery is
fully charged, 5-segment shown
on the battery LCD. If battery
needs to be recharged, see the
“Charging Procedure”, at the
end of this section.
•
Inspect the Heater Unit to
ensure that the heater plates are
clean and dry. Wipe off any
particles or debris on the plate
with a soft cloth.
•
There are no adjustments on
the Heater Unit.
Heater Unit can be installed on top of the Battery
Housing
The Heater Unit is placed close to
the fluid insertion site during
operation.
Install the Disposable Set
•
Carefully remove the
disposable from its pouch.
•
Install it into the Heater Unit,
being careful to line up the
orientation notches on the
disposable with the orientation
pins on the Heater Unit.
Take care not to damage the
disposable.
Line up orientation hub on the disposable with the
notch in the Heater Unit.
(Red to Red)
The Heater Unit will not close if they are not aligned.
BED
SHEET
CLAMP
7
