BELINEA 10 18 30, Руководство пользователя

Страница: 19 / 29

Operating Instructions - 17
ENGLISH
TROUBLESHOOTING
Blank Screen
Power indicator is off
- Make sure the power cable is connected properly (see section “Connecting”).
- Make sure that the monitor was turned on using the power switch (see section “Startup”).
Power indicator lights orange
- Perhaps a power saving mode is active (see section “Energy Saving Functions”)?
- Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
- Is the PC turned on (see your PC’s documentation)?
Power indicator lights green
- A screen saver may have activated automatically after a certain period of inactivity. Press any key on your
keyboard or move the mouse.
“No Signal” message
- Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
- Is the PC turned on (see your PC’s documentation)?
Display Problems
Image is displaced to the left/right or to the top/bottom
- If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter ”Basic Setup”, section ”Automatic Image Adjustment” or chapter ”OSD Menu Functions”, section ”Adjust
Position”.
Image is blurred
- Check brightness and contrast settings (see chapter “OSD Menu Functions”, section “Brightness & Contrast").
- Check the video noise setting (see chapter “OSD Menu Functions”, section “Video Noise”).
- At resolutions lower than 1280 x 1024 pixels the image is displayed using interpolation, which can lead to a slightly
blurred image. For this reason, select the optimum resolution of 1280 x 1024 pixels wherever possible.
Color problems
- If the colors are off (e.g. white is not really displayed as white etc), you should adjust the color temperature (see
“Adjust Color” function in section “OSD Menu Functions”).
ENERGY SAVING FUNCTIONS
This monitor is equipped with power management functions
according to EPA standard. If your computer is using a
compatible graphics adapter or appropriate software, energy
consumption can be automatically reduced when your
monitor is idle. When the monitor is in power saving mode,
the color of the status LED (see
‚
in figure 5) will turn orange.
The monitor will automatically switch back on when you
use the keyboard, mouse or another input device.
The following table illustrates power consumption values
and display indications for this automatic power saving
feature:
Mode Video H-sync V-sync Power Power LED
Used Saving (%) color
On aktive yes yes < 60 watts 0 green
Off blanked no no < 3 watts 90 orange
This monitor is ENERGY STAR®-compatible. MAXDATA is an ENERGY STAR® partner and guarantees that this device
complies with the ENERGY STAR® guidelines for optimizing power consumption.