Product Number: QG0014-01 Revision: A0; Date: 4/29/13
11
Serial Port
The serial port provides RS-485 communication on a male
DE9 connector. This is the pinout of the serial port:
Misc. Advice
When you login to the system controller, the default user ID
is
envyadmin
and the default password is
software
.
If you have only one power cord, you will hear a high-pitched
beep when you turn on your controller. Press the red alarm
mute button at the rear to stop the beeping.
When you turn off your controller, never just disconnect
power. Always press the ‘Power Down to Remove’ button of
each system controller before you power down.
The default pathname of NV9000-SE Utilities configuration
storage (on your PC) is
C:\Documents and Settings\‹
user
›\CtrlSysConfigs
and does not exist until you first launch NV9000-SE Utilities.
The NV920 frame has two power supplies for redundancy. If
power is interrupted, a power supply failure alarm sounds.
This audible alarm does not cease until the power supply
source is once again stable. To turn off the power supply
alarm, press the red power supply alarm mute button located
on the rear of the frame, as shown in Figure 2 (on page 2).
NV920 Specifications
System Controller Specifications
Contact Information
Contact Miranda if you need information about NVISION
router control systems or third-party automation systems.
Spec
Data
Power
Auto-ranging, 100–240 VAC, 47–63 Hz.
150 Watts, 4–2
A, each module.
Weight
29.8 lb (13.5 kg)
Size
1RU × 21.1 inches deep (53.6 cm)
USB ports
2, high-speed
Monitor port
VGA, HD15
Serial port
DE9, RS-485
Ethernet ports
3, RJ-45, two 10/100/1000baseT;
one 10/100baseT
5
4
3
2
1
Rx
Rx+
Tx
Tx+
GND
Spec
Data
Weight
29.8 lb (13.5 kg)
Processor
Intel, Atom, N450, 1.6 GHz
OS
Windows XP Embedded
RAM
2 GB
Disk
Two, 500 GB
www.miranda.com
In the Americas, call toll-free +1-800-224-7882 (9 am to 9 pm EST)
In Europe, the Middle East, African or the UK, (9 am to 6 pm, GMT)
call +44 (0) 1491 820222
In France, call +33 1 55 86 87 88
(9 am to 5 pm, GMT + 1)
In Asia, call +852-2539-6987
(9 am to 5 pm, GMT + 8)
In China, call +86-10-5873-1814
Miranda Technologies, Inc.
Tel: 514-333-1772
3499 Douglas B. Floreani
Fax: 514-333-9828
Montreal, Quebec
Canada H4S 2C6
Find warranty, RMA notice, tech support, and other notices in the User’s Guides.
Specifications are subject to change without notice. © 2013 Miranda Technolo-
gies. All Rights Reserved. NVISION is a registered trademark of Miranda Technolo-
gies, Inc. All other trademarks are the property of their respective owners.
