background image

10

Product Number: QG0014-01 Revision: A0; Date: 4/29/13

3)  Select Internet Protocol (TCP/IP). Click ‘Properties’ again:

4)  Select ‘Use the following IP address’ and enter an IP 

address for the PC: 

The IP address must be unique on the house network. (The 
subnet mask must be 255.255.255.0.)

5)  Click OK and it is done. Close all the Network Connec-

tions windows. 

Matching Your House Network 

To add your system controller to your facility’s “house net-
work”, follow these steps: 
1) Attach a keyboard, monitor, and mouse to your system 

controller. Use the USB and VGA ports at the rear of the 
NV920 to do so. 

2)  Login to the system controller (which you will see is run-

ning Windows XP embedded).

3)  Go into Windows ‘Network Connection’ on the controller 

and find one of the Ethernet ports. 

4)  Give it an IP address (and subnet mask) that is unique on 

your facility’s network. It should remain a fixed address.

5)  Close all network configuration windows.
6) Log out. 
7)  Repeat these steps for the other system controller, if there 

is one.

Installing NV9000 Tools on Your PC 

The system controller comes with several useful applications 
that you can run if you are logged into the controller. 

EC9700 (Control GUI).

Panel, GUI, and Salvo Editor (a.k.a. PGSE)

EC9710 (Status GUI)

System Manager 

Tieline Status GUI

You will probably want to copy these to some or all of your 
configuration and GUI PCs. 
Follow these steps to distribute the tools:
1) From the system controller, copy 

C:\nvision\envy\install\client\SV0269-04.msi 

to the target PC. 

S

The released tools installer is SV0269-04, version F. However, it 
might be in that folder as Setup.exe. 

2)  Run the installer on the PC. (The installer takes you 

through several steps, asks a few questions, and in particu-
lar, asks for the address(es) of you controller(s): 

Enter the house net address(es) of the controller(s).
Some of these applications require setup or configuration 
in NV9000-SE Utilities. Read the associated manual 
(downloadable from the Miranda web site) or call Miranda 
tech support. 

Содержание Miranda NV920












Отзывы: