MACH 4000
Release 11/08
31
Before attaching an SFP or XFP module, first remove the protective cap
of the SFP/XFP module.
Push the SFP/XFP module with the lock closed into the socket until it
latches audibly in place.
Note: Only use Hirschmann SFP/XFP modules
(see on page 53 "Accesso-
ries")
.
2.1.4
Installing the power supply unit on the back of the de-
vice
Remove the cover panel.
Slide the power supply unit all the way into the basic device along the
mounting rails above and below.
Make sure that there is a good connection between the multiple plug of
the plug-in power unit and the female multipoint of the system bus.
Screw the four slotted-head screws in the front panel of the plug-in power
unit flush with the frame of the basic device.
2.1.5
Installing the plug-in power units in the
M4-POWER power unit chassis
When replacing a defective plug-in power unit, only use a plug-in power unit
of the M4-P-... 300W type.
(see on page 52 "Order numbers/product descrip-
tion")
.
Содержание HIRSCHMANN MACH 4000 Series
Страница 56: ......