Belden grass valley MV-830 Series Скачать руководство пользователя страница 76

Страница: 76 / 83

Specification

Multiviewer Head Display Outputs

Video Standard

3G: 1080p or 720p 2.97Gbps. 75 ohm coax.

Frame rate

50, 59.94 & 60 frames per second.

Reference timing

One reference for all outputs. The Head Display Outputs lock,
according to multiviewer’s reference setting, to one of:

• Host Router Reference.

• Internal Reference (free running).

Video Delay (latency)

Progressive input:

• 1 input frame + 1 to 3 output frames.

Interlaced input:

• 1 input field + 1 to 3 output frames.

Table A-7:

Output H.264 Streams

Scaled H.264-encoded copies of the multiviewer inputs, licensed
on the MV-831 module (MV-831-H264).

Each multiviewer input is H.264 encoded to create streamed
copies of the 48 inputs. These are streamed out over IP.

Note:

The H.264 streams do not function for the following

slower-frame-rate HD standards:

• 1080p30 (and slower frame rates); and

• 720p30 (and slower frame rates).

These streams can be viewed on desktop PCs via the Grass Valley
GV Orbit Lite.

Applications include:

• confidence monitoring.

• compliance monitoring.

Number

Up to 48-off.

Encoding

H264-encoded streams.

Table A-6: (continued)

Multiviewer Head Display
Outputs

Содержание grass valley MV-830 Series




















































































Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды

Belden grass valley MV-830 Series, Руководство пользователя

Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды