49
MV-831
User Manual
Refer to
on page 44 for MV-831 module slot locations.
Module Fitting Procedure
Please ensure that you have read
, on page 48 before proceeding to fit
modules.
Rear panel for MV-831 module:
1 Go to the
rear
of the router frame.
The procedure begins with the fitting of rear modules:
2 Locate the rear slot pairs for
MV-831
fitting.
Refer to
on page 44 for MV-831 module fitting locations.
3 Insert an MV-831 Rear Panel module (
MV-830-RP
) into the rear slot pair.
Repeat for each
MV-830-RP
if more than one is being fitted.
Note:
When inserting a
front
module into a
front
slot:
• Check the module is the correct one for the slot.
• Check there are no obstructions at the module connectors.
• Check for any high components on the module’s top- or
under-side. Do not knock these during fitting.
• Insert the module into the slot and slide the module into the
frame.
• When the module is nearly fully in the frame, gently push
the module levers, see Figure 3-10.
• In the last few millimeters of travel, the module connectors
mate with the internal router motherboard and its rear
panel module.
Some resistance will be met; ease, but do not force, the
module in with the levers.
• If excessive resistance is met, remove the module and re-
check that the module and slot are correct. Check the slot
for any obstruction. Check the module connectors for any
damage or foreign objects.
• In the final few millimeters of travel, the levers engage with
the router frame, locking the module into position
