Belden grass valley MV-830 Series Скачать руководство пользователя страница 21

Страница: 21 / 83

MV-831

User Manual

Order Codes

Table 1-3: MV-831 Order Codes

Order Code

Description

MV-831-MB

MV-831 main module (a double-width, front module),



includes a license for 4 display outputs. (Display outputs 1 to 4.
I.e. enough for one 4K output display.)

MV-830-RP

The MV-831 multiviewer uses the same rear panel as on the MV-
830.



(A double-width rear module, with SFP cages for accepting SFP

video

output modules for display outputs.)

Note

: SFP video output modules must be ordered separately.

Additional Licenses:

MV-831-H264

Factory-fitted option to provide the capability to stream out
H.264 copies of multiviewer inputs.

Additional Display
Outputs:

For additional head display outputs. This comprises supplied
codes to enable more outputs:

MV-831-OP56

License to enable outputs 5 and 6.

MV-831-OP78

License to enable outputs 7 and 8.

MV-831-OP910

License to enable outputs 9 and 10.

MV-831-OP112

License to enable outputs 11 and 12.

Note:

SFP video output modules for additional head display

outputs must be ordered separately.

SFP Modules (Video):

Per SFP module:

• 2-off SDI outputs (coaxial or fiber); or

• 1-off HDMI output.

CC-TTH-3G-N

Multiviewer HD-BNC Dual Output SFP module.



Grass Valley module number SM-TT-3G.

ST31ST31-3

Multiviewer Fiber Dual Output SFP module (1310 nm, single
mode).

FC1-HDMI1

HDMI single output SFP module.

SFP Module (Ethernet):

FGAEY 1GBE-SFP

Ethernet 1GbE SFP.

SFP Module (Blank):

SFPBLANK

SFP blanking plug (dust and EMC cover).

Содержание grass valley MV-830 Series




















































































Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды

Belden grass valley MV-830 Series, Руководство пользователя

Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды