Belden grass valley MV-830 Series Скачать руководство пользователя страница 52

Страница: 52 / 83

Hardware Installation

Unpacking

Unpacking

The MV-831 Multiviewer is supplied in dedicated packaging provided by the manufacturer and
should not be accepted if delivered in inferior or unauthorized materials.

1 Carefully unpack the system components and check them against the listed items here:

• MV-831 Multiviewer main module.

• MV-831 Multiviewer rear module.

2 Check that the equipment has not been damaged in transit. If there is anything incorrect,

then notify your Grass Valley Partner, or Grass Valley, at once.

3 Always retain the original packing materials if possible, they could prove useful should it

ever be necessary to transport or ship the equipment.



4 Always read the installation guide and the user instructions carefully, it will provide you

with helpful hints and tips about care and maintenance and help you get the most out of
your MV-831 Multiviewer.



(Grass Valley manuals may be downloaded from

http://www.grassvalley.com/products/

)

CAUTION

Electrostatic Damage

Static precautions must be observed when handling, inserting or
removing modules.

Содержание grass valley MV-830 Series




















































































Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды

Belden grass valley MV-830 Series, Руководство пользователя

Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды