Belden grass valley MV-830 Series Скачать руководство пользователя страница 11

Страница: 11 / 83

MV-831 Multiviewer

User Manual

Safety Information Continued

Lithium Batteries

Battery

Warning

Your Grass Valley equipment usually comes with at least one button battery located on the
main printed circuit board. The batteries are used for backup and should not need to be
replaced during the lifetime of the equipment.

Battery Disposal

Before disposing of your Grass Valley equipment, please remove the battery as follows:

1 Make sure the AC adapter / power Cord is unplugged from the power outlet.

2 Remove the protective cover from your equipment.

3 Gently remove the battery from its holder using a blunt instrument for leverage such as a

screwdriver if necessary. In some cases the battery will need to be desoldered from the
PCB.

4 Dispose of the battery and equipment according to your local environmental laws and

guidelines.

WARNING

• Be careful not to short-circuit the battery by adhering to the

appropriate safe handling practices.

• Do not dispose of batteries in a fire as they may explode.

• Batteries may explode if damaged or overheated.

• Do not dismantle, open or shred batteries.

• In the event of a battery leak, do not allow battery liquid to come in

contact with skin or eyes.

• Seek medical help immediately in case of ingestion, inhalation, skin

or eye contact, or suspected exposure to the contents of an opened
battery.

Содержание grass valley MV-830 Series




















































































Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды

Belden grass valley MV-830 Series, Руководство пользователя

Результаты поиска

Содержание grass valley MV-830 Series

Отзывы:

Похожие инструкции для grass valley MV-830 Series

Бренды по названию

Популярные бренды