Belden grass valley MV-830 Series, Руководство пользователя

Страница: 63 / 83

47
MV-831
User Manual
The relevant rear slots are now emptied.
5 Now move to the front of the router.
6 Unlock and open the router outer front door and

open the relevant internal fan door (refer to Figure 3-5).
Front module removal:
7 Locate the pair(s) of front modules to remove. Refer to Table 3-2 on page 44.
8 Remove all front modules from front slots that need to be emptied by pulling on the two
module eject levers and sliding the module out of the frame. See Figure 3-7.
9 Close and secure the internal fan door.

Close and lock the router outer front door.
All relevant slots should now be empty, both front and rear, ready for fitting one or more MV-
831 modules.
10 Continue immediately to read Fitting Preliminaries , on page 48 before starting Module
Fitting Procedure , on page 49.
WARNING

Some rear panels have sharp, pointed locating pins.

MV-831 rear panels have sharp locating pins.
IMPORTANT When removing any module:
Take care not to knock high components mounted on the top- or on the
bottom-side of the module or any surrounding modules. Because any
knock may damage the module being removed, or the surrounding
modules in the router frame.
Fig. 3-7: Removing Front Modules, showing use of module eject levers
Remove by pulling
module ejector lever
handles.