21 / EN
Microwave Oven / User Manual
•
Unplug your oven before cleaning.
•
Do not use abrasive cleaners, steel wools, rough
washing clothes or abrasive chemicals such as
sulphur or chloride on or at any parts of your
microwave oven.
Outer surfaces
•
To clean the outer surfaces of the oven, first
wipe them with a soft cloth soaked in warm
soapy water. Then wipe them dry again with a
soft cloth.
•
Do not allow water ingress into the ventilation
openings in order to avoid damage to the live
parts inside the oven. Clean the control panel
of your microwave oven only with a damp and
soft cloth.
•
Do not use cleaning sprays or more soap and
water. They may cause problems in control mec-
hanism.
•
Failure to maintain the oven in a clean condition
could lead to deterioration of the surface that
could adversely affect the life of the appliance
and possibly result in a hazardous situation.
•
Cleaning the door seals and adjacent parts: Use
hot soapy water. Clean with a dish cloth, do not
scour. Do not use a metal or glass scraper for
cleaning.
5
Cleaning and Care
Inner surfaces
To clean the inner surfaces of the oven:
•
To soften the dried stains, place a glass of water
inside the microwave oven and heat for 2-3 mi-
nutes. The steam created will soften dried stains
making cleaning easier.
•
Clean the inner surfaces and ceiling with a soft
and soapy cloth. And dry again with a soft cloth.
•
To remove the odours inside the oven, boil a mix-
ture of water and a few table spoons of lemon
juice for a couple of minutes inside the oven.
•
To clean the inner base of the oven, remove the
roller glass tray and roller support. Wash the rol-
ler glass tray and roller support in soapy water.
Then, rinse and dry them.
•
Before starting the oven, install the roller
support and glass tray securely.
•
When cleaning the inner surfaces of the oven
door, use a non-abrasive soft sponge or cloth.
For transportation;
•
Unplug the appliance.
•
Pack the glass tray in a way to prevent them from
breaking and moving inside the oven. Transport
it separately if needed.
•
Tape the front door to the body.
•
Prevent impact against the front glass, door and
panel.
•
Transport the product in normal position. Do not
lean it aside or back.
