Beko BEKOMAT 16i CO, Перевод оригинального руководства по установке и эксплуатации

Страница: 39 / 76

Connection work - single device
Illustration Description / explanation
Connection cable [X8]
8. Connect the connection cable [X8] according to the
terminal diagram “4.7 Terminal diagram power control
board” on Page 28.
B
4
X8
5
6
10
9. Screw the cable gland components [4, 5, 6] onto the
right cable gland [B] .
10. Fit the screw terminal [10] .
2
1
11. Set the top cover [2] in place and insert the screws [1] .
12. Tighten the screws [1] with a torque of
0.5 Nm +0.30 Nm (0.37 ft-lb +0.22 ft-lb).
Original installation and operation manual BEKOMAT
®
16i CO
39 | 76