2.5.6 Maintenance
Inappropriate completion of maintenance and repair work may result in serious personal injuries or death.
For safe maintenance and repair, observe the following points:
• Use suitable protective equipment during all work on the product or accessories.
• Set up a safety area around the working area during all work.
• Before starting work, depressurise the pressurised product and accessories and secure them against unintentional
pressurisation.
• Before starting work, de-energise the product and accessories and secure them against being switched back on again
unintentionally.
• Only use materials approved for the respective application.
• Use only suitable tools that are in proper working order.
• Only use cleaned pipes and hoses that are free of dirt and corrosion.
• Never use abrasive or aggressive cleaning agents or solvents which could damage the outer coating (e.g. markings,
type plate, corrosion protection, etc.).
• Never clean the device with hard or pointed implements.
• Use an anti-static, damp cloth for cleaning the outside.
• Observe the regionally applicable hygiene regulations.
• Pay attention to cleanness and tidiness during maintenance and repair work. Prevent contamination from entering
the opened product or accessories. Store the disassembled components and accessories directly in a safe place.
• After completing maintenance and repair work, remove all the tools and cleaning media used as well as all parts that
are no longer needed from the work area.
• Only dispose of the product and accessories when cleaned and freed of any media residue.
• Dispose of all components, parts, operating and auxiliary materials as well as cleaning media professionally and in
accordance with regional legal specifications and regulations.
• Dispose of electrical and electronic components through a specialist waste disposal company or return to
BEKO
TECHNOLOGIES.
2.5.7 Handling hazardous substances
Contact with condensate containing substances which endanger health and the environment can pose a health hazard,
causing irritation and/or damage to the eyes, skin and mucous membranes. In addition, polluted condensate must be
prevented from entering the sewerage system, waters or the ground.
For the safe handling of polluted condensate the following points must be observed:
• Use suitable protective equipment when handling condensate.
• Pick up and dispose of any leaking or spilled condensate in accordance with applicable regional laws and
requirements.
BEKOMAT
®
16i CO
Original installation and operation manual
12 | 76
