6.2 Assembly conditions
Wrong
Right
Description / explanation
185 (7.28)
mm
(inch)
Minimum installation height
• The inlet height must be located lower than
the lowest point of the collecting tank, at
least 185 mm (7.28 in).
> 3%
Continuous slope >3 % in hoses
• When using hoses as the feed line, ensure a
continuous slope >3 %.
• Do not form water pockets.
> 3%
Continuous slope >3 % in pipes
• When installing the feed line pipe, ensure a
continuous slope >3 %.
• Do not form water pockets.
• If installation height is limited, install the
lower inlet with a separate venting line.
> 3%
Continuous slope >3 % in pipes
• When installing the feed line pipe, ensure a
continuous slope >3 %.
• Do not form water pockets.
Original installation and operation manual
BEKOMAT
®
16i CO
31 | 76
