Beko Bekoblizz LC 12-355 Скачать руководство пользователя | Manualshive

Страница: 17 / 64

background image

Installation

BEKOBLIZZ® LC 12-355

17

8.4

Connection to the compressed-air system

Danger!
Compressed air!

All works must only be carried out by qualified skilled personnel.
Never work on compressed-air systems which are under pressure.
The operator or the user must ensure that the chiller is never operated with a pressure exceeding the
maximum pressure value indicated on the name plate.
Exceeding the maximum operating pressure can be dangerous for the operator but also for the device.

The air temperature and the air flow at the inlet of the chiller must lie within the limit values indicated on the name
plate. The connecting lines must be free from dust, iron rust, shards and other contaminations and correspond to the
flow rate of the chiller. Should air with a very high temperature be treated, the installation of an aftercooler may be
necessary. For the implementation of maintenance works, the installation of a bypass system is recommended.

Note!
Pulsation and vibrations!

Pulsations and vibrations must be eliminated from the compressed air and IN/OUT piping to avoid
possible fatigue failure.
Do not use the chiller to treat air containing corrosive substances for copper and its alloys..

CAUTION!

During the piping of the chiller, the inlet and outlet connections need to be supported as is shown in the
illustration.
Non-observance will cause damage.

===== Ende der Stückliste =====

Note!
Contaminated intake air!

In the event that the intake air is strongly contaminated (ISO 8573.1 class 3.-3) or poorer quality, we
recommend the additional installation of a prefilter (e.g. CLEARPOINT F040), to avoid clogging of the
heat exchanger.

8.5

Connection to the cooling-water network

Danger!
Compressed air and unqualified personnel!

All works must only be carried out by qualified skilled personnel.
Never work on compressed-air systems which are under pressure.
The user must ensure that the chiller is never operated with a pressure exceeding the nominal values.
Possible overpressure can be dangerous for the operator but also for the device.

The temperature and the amount of cooling water need to correspond to the limit values indicated on the name plate.
The cross-section of the connecting lines, which should preferably be flexible, must be free from dust, iron rust, shards
and other contaminations. We recommend employing connecting lines (flexible hoses, vibration-inhibiting fittings etc.)
which protect the chiller against possible vibrations in the pipework.

Note!
Contaminated intake water!

In the event that the intake water is strongly contaminated we recommend the additional installation of a
prefilter (500 micron), to avoid clogging of the heat exchanger.

«
...
15
16
17
18
19
...
»

Содержание Bekoblizz LC 12-355

































































Отзывы:

Нет отзывов

Похожие инструкции для Bekoblizz LC 12-355

Бренд: Daikin Страницы: 88

Бренд: Rato Страницы: 24

OMNI OWC-5 Series

Бренд: Enviroheat Страницы: 70

York YCAV1039-1909

Бренд: Johnson Controls Страницы: 310

Бренд: Lorenz Страницы: 30

Бренд: Troy-Bilt Страницы: 40

Бренд: Power Fist Страницы: 20

Chilly Max Series

Бренд: KREYER Страницы: 18

Бренд: KREYER Страницы: 36

Бренд: Retigo Страницы: 56

Бренд: Yard Machines Страницы: 24

Бренд: Qualcast Страницы: 20

EWAH TZ D Series

Бренд: Daikin Страницы: 53

Бренд: Weed Eater Страницы: 24

Бренд: Webb Страницы: 32

Бренд: Worcraft PROFESSIONAL Страницы: 44

Бренд: Worcraft PROFESSIONAL Страницы: 64

Бренд: Timberwolf Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды