manualshive.com logo in svg

Beko Bekoblizz LC 12-355, Инструкция по установке и эксплуатации

Поделиться
Скачать
Beko Bekoblizz LC 12-355 Скачать руководство пользователя страница 11

 

 

Proper use 

BEKOBLIZZ® LC 12-355 

 

11 

3  Proper use  

This chiller was designed, manufactured and tested to separate the moisture which normally exists in compressed air. 
Any other use is considered improper. 
The manufacturer shall not be liable for problems occurring as a consequence of improper use. The user alone is 
responsible for any damage resulting from that. 
Furthermore, the correct use includes the compliance with the installation instructions, in particular in respect of: 
•  The voltage and frequency of the main voltage supply. 
•  The pressure, temperature and flow rate of the inlet air. 
•  The pressure, temperature and cooling-water throughput (water-cooled). 
•  The ambient temperature. 
When delivered, the chiller is tested and fully assembled. The customer only needs to connect the device to the system 
in accordance with the instructions in the following chapters.    
 

Pos: 15 /Beko Technische Dokumentation/Übeschriften/1/Ausschluss vom Anwendungsbereich @ 0\mod_1236003439359_6.doc @ 13709 

4  Exclusion from a field of application  

Pos: 16 /Beko Technische Dokumentation/Bestimmungsgemäße Verwendung/BEKOMAT/Ausschluß Anwendung BM 31/32/33 @ 0\mod_1236003837511_6.doc @ 13736 

 

 

Note! 
Improper use!

 

 
The device is intended for the separation of water in compressed air. The dried air cannot be used for 
breathing-air purposes and is not suitable for the direct contact with food. 
This chiller is not suitable for the treatment of contaminated air or of air containing solids. 

 

Содержание Bekoblizz LC 12-355

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды