Beijer Electronics CIMREX 10, Руководство по установке

Страница: 90 / 112

Chemical resistance
B-2 Beijer Electronics AB, MA00557F
Autotex withstands DIN 42 115 Part 2 exposure of <1 hour duration to glacial acetic acid
without visible change.
Autotex is not resistant to high pressure steam at over 100
°
C or the following chemicals:
Autotex withstands 24 hours exposure to the following reagents at 50
°
C without visible
staining:
Very slight discoloration was noted under critical viewing conditions with the following
materials:
Outdoor use
In common with all polyester based films Autotex F207 is not suitable for use in conditions of
long term exposure to direct sunlight.
Ethanol Formaldehyde 37 % - 42 % Ferrous chloride
Isophorone Potassium hydroxide <30 Dibutyl Phthalate
Ammonia <40 % Linseed oil Dioctyl Phthalate
Caustic soda <40 % Paraffin oil Sodium carbonate
Hydrogen peroxide <25 % Blown castor oil Petrol
Alkalicarbonate Silicone oil Teepol
Bichromate Turpentine substitute Water
Diesel oil Universal brake fluid Sea water
Acetonitrile Decon
Sodium bisulphate Aviation fuel
Concentrated mineral acids Benzyl alcohol
Concentrated caustic solution Mehylene chloride
Top Job Grape Juice Ariel Ajax
Jet Dry Milk Persil Vim
Gumption Coffee Wisk Domestos
Fantastic Lenor Vortex
Formula 409 Downey Windex
Tomato juice Tomato ketchup Lemon juice Mustard