Behringer ULTRA-CURVE PRO DSP8024, Руководство пользователя

Страница: 36 / 56

36
Typ AES / EBU IEC 958 (S/PDIF)
Connection XLR Cinch / Optisch
Mode Balanced Unbalanced
Impedance 110 Ohm 75 Ohm
Level 0,2 V bis 5 Vpp 0,2 V bis 0,5 V pp
Clock accuracy Not specified I: ± 50 ppm II: 0,1 % III: Variable Pitch
Jitter ± 20 ns Not specified
Tab. 4.1: Important data for the AES and IEC specifications
Unfortunately, the professional standard was soon watered down, as the design of many units didn't provide
enough room for XLR connectors. Instead, stereo jacks, miniature jacks and special adapters for sub-D con-
nectors were used.
In addition to the electrical differences, the formats also have a slightly different structure. The audio informa-
tion occupies the same position in the data stream, making the two formats compatible in principle. The
differences between the two standards can be found in the information blocks. Table 4.2 shows a section of the
professional format data structure generally used in AES/EBU connections.
Byte Bit
0 1 2 3 4 5 6 7
0 P/C Audio? Emphasis Locked Sampl. Freq.
1 Channel Mode Use of User bits
2 Use of AUX bits Length of audio sample Reserved
3 Reserved for description of multichannel recording
4 Audio reference Reserved
5 Reserved
Tab. 4.2: Professional format (AES/EBU) ID data
Table 4.3 shows the corresponding data of the consumer format commonly used for S/PDIF connections. The
first bit serves to identify the following data as professional or consumer format.
Byte Bit
0 1 2 3 4 5 6 7
0 P/C Audio? Copy Emphasis Mode
1 Category code Gen.St.
2 Source number Channel number
3 Sampling frequency Clock accuracy Reserved
Tab. 4.3: Consumer format (S/PDIF) ID data
As can be seen, there are major differences in the significance of the following bits between the two formats. If
a device such as a commercially available DAT recorder only has a S/PDIF input, the device will normally only
understand that format. Generally, it will switch off when receiving professional-format data. The reason is
simple: As the illustrations show, a signal coded in professional format would lead to copy-protection and
emphasis errors in a device only capable of processing the consumer format!
As was already the case with the connectors, this point is often not immediately obvious. Many units do not
switch off, others can process both formats despite having only a single connector type, and still others are
simply faulty designs which refuse to work properly even when receiving correct ID data.
The ULTRA-DYNE PRO can be equipped with an AES/EBU interface as an option.
4. TECHNICAL BACKGROUND
All manuals and user guides at all-guides.com
all-guides.com