EN
30
5. Clean the teapot (
2
), the lid (
15
), the drip tray (
8
) and the cover (
9
) as well as the tea strain-
er
b
(
1
) with warm water and mild detergent.
6. Dry all parts properly before the device is reassembled and / or stored away.
7. Check the connecting cable regularly for any damage.
The housing and the outside of the teapot should be cleaned regularly to remove any dust,
fi
nger-
prints or other marks and streaks. For this purpose, we recommend the
BEEM Premium Cleaning
Cloth
. This specially impregnated cloth gets rid of dust and unsightly
fi
ngerprints in next to no time – it
does not scratch and is particularly gentle to the material. An additional cleaning agent is not required.
The
BEEM Premium Cleaning Cloth
can be obtained from selected specialist stockists, directly via our
website
www.beem.de
or from our customer service department on request.
Cleaning the Teapot
Over time tea residues may stain teapots. They should therefore be thoroughly cleaned regularly
(at least every 4 weeks).
We recommend that you do this using
BEEM Premium Cleaning Tablets
. They will remove the residues
quickly and easily. In addition, the cleaning tablets are gentle on the material and guarantee food-
safe cleaning - ensuring an authentic tea
fl
avour.
BEEM Premium Cleaning Tablets
can be obtained
from selected specialist stockists, directly via our website
www.beem.de
or from our customer service
department on request.
Cleaning with the BEEM Premium Cleaning Tablets
1. Dissolve one cleaning tablet in water at 60 – 70°C.
2. Pour the solution into the teapot (
2
).
3. Close and move the teapot to ensure that the inside is wetted with the cleaning solution.
4. Let the cleaning solution take effect for a few minutes.
5. Empty out the cleaning solution and thoroughly rinse the teapot several times.
The BEEM Cleaning Tablets do not have any descaling effect!
Descaling
Limescale deposits have an adverse effect not only on the quality of the tea and the water, but
they also cause power losses and shorten the lifespan of the device. The thicker a limescale layer is,
the more dif
fi
cult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent in accordance
with the water quality in your area and how often the device is used (approx. every 2 – 6 weeks).
The
fi
rst indications that descaling is required are a large amount of steam being produced and
slower boiling of the water. Limescale deposits on the bottom of the reservoir in samovars can
cause the device to switch off prematurely.
07204_DE-EN-FR-ES-IT_A5_V3.indb 30
07204_DE-EN-FR-ES-IT_A5_V3.indb 30
08.02.2021 11:43:29
08.02.2021 11:43:29
