31
EN
For descaling we recommend the
BEEM Premium Descaler Concentrate
. The ef
fi
cient and food-safe
BEEM Premium Descaler Concentrate
is available from selected specialist stockists, via our website
www.beem.de
or from our customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water reservoir (
5
) up to the
MAX
marking with a concentrate/water solution of no
more than 1:20 (one part concentrate to 20 parts water).
2. Turn the control dial (
6
) to the highest temperature (
) to switch on the device. The heat-
ing control lamp
(
11
) lights up. The solution starts boiling.
3. As soon as the solution has boiled, turn the control dial down to a lower temperature. Let the
solution take effect for a little while.
4. Allow the solution to run through the discharge tap (
12
) so that it is also freed of any limes-
cale residues (see the “Operation” chapter – “Operating the Discharge Tap”).
5. To rinse the device, allow two tankfuls of clear water to run through it. The device is now
descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a prolonged
period. Clean the device again (see the “Cleaning and Care” chapter) to avoid possible mould
formation. Mould can cause spots and damage on the device that can no longer be removed /
repaired. Allow the device and all accessories to dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from direct
sunlight and cannot be accessed by children or animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem yourself.
If the problem cannot be solved with the steps listed, contact the customer service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible
cause
Fix
The device cannot be
switched on.
The mains plug is not inserted
correctly in the plug socket.
Insert the mains plug.
The plug socket is defective.
Try another plug socket.
There is no mains voltage.
Check the fuse of the mains
connection.
The control dial (
6
) has not been
activated.
Turn the control dial to the
highest temperature (
).
The fuse in the fuse
box is triggered.
Too many devices connected to
the same circuit.
Reduce the number of devices in
the circuit.
07204_DE-EN-FR-ES-IT_A5_V3.indb 31
07204_DE-EN-FR-ES-IT_A5_V3.indb 31
08.02.2021 11:43:29
08.02.2021 11:43:29
