Beckman Coulter Microfuge 20 Series, Инструкция по эксплуатации

Страница: 51 / 74

B30162AA 3-3
Troubleshooting
User Messages
3
Table 3.1 Error Message Chart
Error Number Problem Recommended Action Explanation
1 through 9, System error After rotor comes to a complete
stop, turn the power off (
O ),
then back on (I) to reset.
All of these errors stop
the centrifuge or
cause it to decelerate
brakeless.
10 through 19, Speedometer error After rotor comes to a complete
stop, turn the power off (
O ),
then back on (I) to reset.
20 through 29 Motor error Turn the power off ( O ). Ensure
ventilation.
30 through 39 EEPROM error After rotor comes to a complete
stop, turn the power off (
O ),
then back on (I) to reset.
Errors 34, 35 and 36
will cause the
centrifuge to stop;
Errors 37 and 38 will
not cause the
centrifuge to stop,
these errors will only
return error messages.
40 through 45 Temperature error
(applies only to
Microfuge 20R
refrigerated
centrifuges) • Allow to slow down
• Power off
• Allow to cool down
• Provide better ventilation
46 through 49 Imbalance error • Allow to slow down
• Power off
• Allow to cool down
50 through 59 Door error • Press door key
•
Close door
•
Remove foreign matter
from the opening of the
door lock device
Errors 50 and 51 will
cause the centrifuge
to stop.
60 through 69 Process error • Allow to slow down
• Cycle power
“With error 60
message “power
failure during run”,
with error 61, the
message “stop after
power on”
70 through 79 Communication error
•
Allow to slow down
• Cycle power