Beckman Coulter JA-14.50, Инструкция по эксплуатации

Страница: 23 / 40

PN B32164AC
13
JA-14.50 Fixed-Angle Rotor
Preparation and Use
Tubes
Tubes for JA-14.50 rotors manufactured prior to October 2016 are listed in Table 1 and Table 2 . Tubes
for JA-14.50 rotors manufactured after October 2016 are listed in Table 3 and Table 4 . Be sure to use
only those items listed, and to observe the maximum speed limits and fill volumes shown.
(Maximum fill volume is the maximum amount that can be centrifuged in the container listed.)
NOTE
JA-14.50 rotors and lids manufactured after October 2016 include the letter “T” after the serial number
( Figure 8 and Figure 9 ).
Refer to Chemical Resistances (publication IN-175) for information on the chemical compatibilities of
tube and accessory materials.
Tubes for JA-14.50 Rotors Manufactured before October 2016
CAUTION
The tubes listed in Table 1 should be used one time only. Tube damage and sample
leakage will result from repeated use.
Do not use glass tubes in this rotor.
Figure 8
Rotor Serial Number with T
Figure 9
Rotor Lid Serial Number with T
1.T
– designates the rotor and lid were manufactured after October 2016
Table 1
Adapters to support tubes from other manufacturers for the JA-14.50 Rotor
a
manufactured before October 2016
Type and
Volume Tube Description Required Adapter
Effective
r
max
(mm)
Effective
r
min
(mm)
Max
Speed/RCF/
k Factor
conical
50 mL
Polypropylene conical tube
with cap
bcdef
N/A 159.7 98.8 g
conical
15 mL
Polypropylene conical tube
with cap
bcef
B40156
(Qty 2 ea. B30033)
156.2 92.2 g