Beckhoff AMI8100, Руководство по эксплуатации

Страница: 53 / 61

Maintenance and cleaning
Version: 1.0 ─── 53 AMI8100
11.2
Intervals
Under nominal conditions, the motor components have different op-
erating hours. We have provided you with a list of maintenance work
and intervals for the associated components below:
Component Interval Maintenance
Ball bearing 30000 operating hours Replace bearing
Servo drive 2500 operating hours/an-
nually Check servo drive for bearing noises
If noises are detected:
do not continue to operate the servo drive; replace bear-
ing
Shaft sealing ring 5000 operating hours Perform visual inspection
Lubricate the shaft sealing ring
Recommended lubricants:
„ MobilgreaseTM FM22“ from Mobil
In case of damage and pressure drop:
Replace shaft sealing ring
Cables Regular intervals Perform visual inspection and check for damage
If required :
Replace cables
5 million bending cycles Replace cables
Sockets 500 cycles In case of damage:
Contact Beckhoff Service