Beckhoff AMI8100, Руководство по эксплуатации

Страница: 13 / 61

For your safety
Version: 1.0 ─── 13 AMI8100
Read this chapter containing general safety information. The chap-
ters in these operating instructions also contain warning notices. Al-
ways observe the safety instructions for your own safety, the safety
of other persons and the safety of the product.
When working with control and automation products, many dangers
can result from careless or incorrect use. Work particularly thor-
oughly, not under time pressure and responsibly towards other peo-
ple.
2.1
Safety pictograms
Beckhoff products feature safety pictograms, either on stickers or
printed, which vary depending on the product. They serve to protect
people and to prevent damage to the products. Safety pictograms
must not be removed and must be legible for the user.
Warning of a hot surface
During and after operation there is a risk of burns at the housing due
to hot surfaces over 60 °C. Allow the housing to cool down for the
specified time, at least 15 minutes.
Avoid shocks to the shaft
Impacts on the shaft may cause the maximum permissible axial and
radial values to be exceeded. Encoder systems can thus be de-
stroyed.