Beckhoff AMI8100, Руководство по эксплуатации

Страница: 26 / 61

Technical data
26 ─── Version: 1.0 AMI8100
4.2
Data for operation and
environment
Beckhoff products are designed for operation under certain environ-
mental conditions, which vary according to the product. The follow-
ing specifications must be observed for operation and environment
in order to achieve the optimum service life of the products.
Operate servo drives only under the specified environmental
conditions
Operate the servo drives only in accordance with the specifications
for operation and the environment listed in this chapter. This en-
sures a long service life and proper operation.
Temperatures above 40 °C and encapsulated installation can
shorten the service life of the servomotor.
Environmental requirements
Climate category - operation 2K3 according to EN 60721
Ambient temperature during operation 0 °C to +40 °C, extended temperature range
Ambient temperature during transport -25 °C to +70 °C, maximum fluctuation 20 K/hour
Ambient temperature during storage -25 °C to +70 °C, maximum fluctuation 20 K/hour
Permissible humidity in operation 5 % to 95 % relative humidity, no condensation
Permissible humidity during transport and
storage 5 % to 95 % relative humidity, no condensation
Specifications for intended use
Cooling Convection
Degree of protection Housing: IP54
Shaft feedthrough: IP20 in mounting position V3 / IP54
Shaft feedthrough with double-lipped FKM shaft seal ring: IP65
Feedback system Absolute encoder, single-turn and multi-turn encoder
Vibration resistance conforms to EN 60068-2-6
Shock resistance conforms to EN 60068-2-27
EMC requirements Conforms to EN 61000-6-2 and EN 61000-6-4
Approvals CE,
cURus
EAC
See chapter: Guidelines and Standards