Beckhoff AMI8100, Руководство по эксплуатации

Страница: 43 / 61

Mechanical installation
Version: 1.0 ─── 43 AMI8100
8.2.2
Mounting
WARNING
Do not touch hot output elements without personal protec-
tive equipment
Only handle hot output elements, such as couplings or pulleys,
with special thermal gloves. Avoid prolonged contact with hot
components.
Hot components can cause severe burns to body parts and
limbs.
Do not mount the drive element offset
Place the drive element centered and straight on the shaft.
An offset will cause unacceptable vibration and the destruction of
the ball bearings and the coupling.
► Warm up the output elements according to manufacturer's in-
structions
► Remove the protective cap
► Degrease and clean shaft
► Remove the output element from the oven and transport it to the
workstation
► Place output element [1] centered and straight on the shaft [2]
► Insert washer [3] with bolt [4] of strength class 8.8 and nut [5]
into the locking thread [6] of the shaft
► Tighten nut [5]
The output element is pulled onto the shaft by the nut.