39
NAVIGATION MODE
>>>
> ZH
> EN
>
By turning the MINI joystick you can
select the starting point of the block.
>
Press the MINI joystick to confirm the
starting point.
>
By turning the MINI joystick you can
now select the end point of the block.
>
Press the MINI joystick to confirm the
end point.
>
Select
Yes
to activate the block.
The block is activated and the new route
is calculated.
Delete section block
You can remove a previously entered
block.
>
In the route menu, select
Clear
blockings
.
The block is deleted and the new route is
calculated. The system performs a route
recalculation.
Skipping a destination
If a planned route with a number of desti-
nations is active, you can delete the cur-
rent destination of the route. Route guid-
ance to the next destination will then be
initiated.
This might be necessary if, for example, a
destination was not driven to directly.
Otherwise the Becker® TRAFFIC STAR
NAVIGATION will attempt to guide
you to the current destination.
>
In the route guidance menu, select
Next
destination
.
Route guidance to the next destination
will be initiated.
Display destination list
If a planned route with several
destinations is active, you can view and
modify the planned route.
>
In the route menu, select
Itinerary
.
A map with the stages of the route is
displayed.
In the left area, the total number of miles/
kilometres and the expected trip time is
displayed.
>
Select
Resume
to continue with the
destination navigation or select one of
the following described functions. You
will see a detailed description of indi-
vidual functions under “Route plan-
ning” on page 27.
