background image

35

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

Selecting a country

You can select a country from those avail-
able using the button for the country of
destination. A country is adopted auto-
matically in the address input menu after
selection. If a country of destination has
already been entered it will remain until
you select a different country.

>

Press the button containing the country
of destination to access the country se-
lection list.

The selection list will appear.

>

Press the button for the desired country.

Selecting an address and starting route
guidance

You can enter the exact destination ad-
dress in the address input menu.

The following settings can be made in the
address input menu:
• Town
• Postcode
• Street and house number
• Junctions as an orientation aid

It is also possible to:
• search for a point of interest near to the 

address entered (

POI search

). This can 

be entered as described under “Point of 
interest near to an address” on page 41,

• save the destination in fast access mode,
• show the route on the map,
• start the route guidance straight away.

Note: 

By pressing the 

 button next to the

country you can display country-specific
information such as the maximum per-
mitted speed for the selected country.

Note: 

If required, press the arrow keys

 on the right of the screen to

scroll through all available countries of
destination.

Содержание Traffic Assist Z 102





















































































Отзывы: