Becker Traffic Assist Z 102 Скачать руководство пользователя страница 33

Страница: 33 / 84

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

Home address

When you press the

Home

button you

will be asked to enter an address if no
home address has yet been entered.

Press

Yes

to enter the address.

You can then enter a destination as de-
scribed under “The destination input
menu” on page 33.

Calling up the destination input menu

The

Enter destination

button can be used

to call up the destination input menu.
• See “The destination input menu” on

page 33.

The destination input menu

If fast destination selection is not required
or the planned destination is not yet in-
cluded in fast access mode, you can enter
a new destination using the destination
input menu.

In fast access mode, press the

Enter

destination

button at the top of the

screen.

The destination input menu will appear.

Protect entry

The destination is pro-

tected against automatic
deletion. This function is
only available in the case
of unprotected destina-
tions.

Remove

protection

Protection of the destina-
tion is disabled. This
function is only available
for protected destina-
tions.

Move up

The destination is moved
forwards by one position.
If the destination is
moved it is automatically
protected.

Move down

The destination is moved
back by one position. If
the destination is moved
it is automatically pro-
tected.

Delete all

entries

All destinations (includ-
ing protected destina-
tions and your home ad-
dress) are deleted from
the list.

Option

Meaning

Note:

The menu items

Set current position

and

Select from last destinations

(fast

access mode) can also be used to select a
destination.

Содержание Traffic Assist Z 102





















































































Результаты поиска

Содержание Traffic Assist Z 102

Отзывы:

Похожие инструкции для Traffic Assist Z 102

Бренды по названию

Популярные бренды

Becker Traffic Assist Z 102, Руководство по эксплуатации

Результаты поиска

Содержание Traffic Assist Z 102

Отзывы:

Похожие инструкции для Traffic Assist Z 102

Бренды по названию

Популярные бренды