Becker Traffic Assist Z 102 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 84

Becker Traffic Assist Z 102 Скачать руководство пользователя страница 9

9

THE TRAFFIC ASSIST

>>>

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

Traffic Assist - basic unit

The basic unit contains all the electronics:
• an integrated antenna,
• a TMC receiver for the reception of

traffic messages*,

• a touchscreen,
• An integrated loudspeaker for the out-

put of messages during navigation.

On the side of the unit, there are also var-
ious connections and ports.
You will find more details of the unit
under:
• See “Technical Data” on page 80.

Cable for power supply from

cigarette lighter

This cable allows the unit to be connected
up to the car's cigarette lighter.
In addition, the TMC messages are also
received via this cable.*
The power supply must satisfy the follow-
ing requirements:
• DC current 12/24 volts

0.5 amps

Battery

When depleted, the integrated rechargea-
ble battery can be recharged by connect-
ing the Traffic Assist to the power supply.
For this purpose, connect the unit via a car
power adapter to a 12/24 V socket in a ve-
hicle or via the optional mains power sup-
ply unit to the 230 V mains.

USB connection cable

You can connect the Traffic Assist to a
standard personal computer having a USB
interface using the USB connecting cable
provided. The 2 GB flash memory of the
Traffic Assist and any micro SD card can
then be addressed via the PC like a
removable storage medium.

Unit bracket

The Traffic Assist can be mounted in the
vehicle using the unit bracket.

Note:

You can charge the Traffic Assist via the
car charger cable included in the scope of
delivery or via the optionally-available
mains power supply unit.
When the Traffic Assist is connected to a
PC, it is supplied with power via the PC
and does not consume battery power.

*Applies only to the Traffic Assist Z 103

«
...
7
8
9
10
11
...
»

Содержание Traffic Assist Z 102





















































































Отзывы:

Нет отзывов