z
For replacement, please use fuses of same type and rating only.
z
If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The arising condensation
water might damage your device. Leave the device switched off until it has reached room temperature.
z
Do not shake the device. Avoid brute force when installing or operating the device.
z
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or dust.
There should not be any cables lying around. You endanger your own and the safety of others!
z
The minimum distance between the fixture and surrounding walls must be more than 50cm.
z
Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the safety-rope only.
z
The ambient temperature must be between 10
℃
to 40
℃
.
z
Please use the original packaging if the device is to be transported.
z
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
BEFORE OPERATION
Unpacking Instructions
CAUTION!
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have
been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear
damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event
that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Proper Laser Set Up & Usage
This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted using a
suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your lighting
vendor.
International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3
meters (9.8 ft) of vertical separation between the floor and the lowest laser light vertically. Additionally, 2.5 meters of horizontal
separation is required between laser light and audience or other public spaces.
CAUTION:
Use of controls, adjustments, or
performance of procedures other than
what is specified herein may result in
hazardous radiation exposure
CAUTION! Operate the device only after having familiarized with its
functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the
result of unprofessional operation!
CAUTION! If this device will be operated in any way different to the
one described in this manual, the product may suffer
damages and the warranty void.
CAUTION: Please consider the respective national norms during
the installation! The installation must only be carried out
by an authorized employee or dealers!
