Rigging the Fixture
z
The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any
harming deformation.
z
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary
safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
z
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
z
The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before
taking into operation for the first time and after changes before taking into operation another time.
z
The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once
a year.
z
The fixture should be installed in the position where persons cannot reach and where persons may walk by or be seated.
PRODUCT OVERVIEW
z
This device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe
operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
z
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any
unauthorized modification to the device.
CONTROL & FUNCTION
z
Regular breaks during operation are essential to maximize the life of this device as it is not designed for continual use.
z
Do not switch the unit on and off in short time intervals
z
Always unplug the unit when it is not used for a longer time. Or before replacing the bulb or start servicing.
z
In the event of serious operation problems, stop using the fixture and contact your dealer immediately.
CAUTION: When installing the device, make sure there is no highly
in inflammable material (decoration articles, etc.) in
between a distance of min o.5 meter.
