BE Ag & Industrial BE-BK Series, Руководство по эксплуатации и запасным частям

Страница: 2 / 33

Understand that your safety and the safety of other persons is measured by how you service and operate this
backhoe. Know the position and operations of all controls before you try to operate. Make sure you check all
controls in all safe area before starting.
Read this manual completely and thoroughly and make sure you understand all controls. All equipment has a
limit. Make sure you are aware of the stability and load characteristics of this backhoe before you begin
operation.
The safety information given in this manual does not replace any safety codes, insurance needs, federal, state
and local laws. Make sure your machine has the correct equipment required by your local laws and regulations.
Before starting the engine of your tractor, make sure all operation controls are in park lock or neutral position.
Operate controls only when seated in the operator’s seat.
Equip your tractor with a ROPS cab or frame for your protection. See your tractor operator’s manual for
correct seat belt usage.
A frequent cause of personal injury or death in persons falling off and being run over. Do not permit others
to ride on your tractor. Only one person, the operator, should be on the machine when it is in operation.
Before leaving the tractor, stop the engine, put all controls in neutral, engage the parking brake and remove
the key from the ignition.
When using remote hydraulic tractor valves on some tractors, the backhoe’s cylinder will continue moving
unless the control levers are manually returned to neutral, or until relief pressure is reached at the ends of
piston strokes. Observe the bucket movement and maintain control with the control levers.
Stop the backhoe arms gradually when lowering or lifting loads. Stay off of slopes too steep for safe operation.
Shift down before you start up or down before you start up or down a hill with a heavy loads.
Avoid “free wheeling”.
Travel speed should be such that complete control and machine stability is maintained at all times. Where
possible, avoid operating operation near ditches, embankments and holes. Reduce speed when turning,
crossing slopes and on rough, slick or muddy surfaces.
Never use your hand to check for suspected leaks under pressure. Use a piece of cardboard or wood for this
purpose. Escaping hydraulic oil or diesel fuel leaking under pressure can have sufficient force to penetrate the
skin and cause infection or other injured by leaking fluid, seek medical attention immediately.
To prevent personal injury, relieve all pressure before disconnecting fluid lines.
SAFETY PRECAUTIONS BE-BKxx
CAUTION
This safety alert symbol indicates important safety messages in this manual.
When you see this symbol, carefully read the message that flows and be alert to the possibility
of personal injury or death.