BE Ag & Industrial BE-BK Series, Руководство по эксплуатации и запасным частям

Страница: 12 / 33

BACKHOE OPERATION (CONT.) BE-BKxx
These two levers (crowd & swing control lever, bucket & boom control lever) provide four simultaneous
operations. Both experience and practice are needed to eliminate excess motion and increase operating
efficiency.
Observe the following safety warnings when working with your new backhoe/tractor:
Swing Lock & Boom Lock
When transporting or dismounting backhoe, you must
lock the backhoe’s swing and boom. Position boom
straight back and drop pin through holes in swing frame
and boom. When not in use, store pin i hole provided on
swing frame and boom.
CAUTION
When using a backhoe, be aware of bucket & boom location at all times. When raising arm
(dipperstick) with bucket rolled forward, material can spill onto non-target area causing injury
to assistant or damage other objects.
Do not dig near stabilizers. Ground under stabilizer could collapse. Make all movements slow
and gradual when practicing operation.
Operate from backhoe operators seat only. Pay attention, be ready to stop, immediately in case
of an emergency.
To help prevent roll-over, adjust the rear wheels to their widest setting to maximize stability.
Refer to your Tractor’s Operator’s Manual for recommendations.