BE Ag & Industrial BE-BK Series, Руководство по эксплуатации и запасным частям

Страница: 13 / 33

BACKHOE REMOVAL BE-BKxx
CAUTION
Move the backhoe to flat, firm and wide place to remove the equipment.
Do not allow to be removed without bucket and stabilizers. Also, dump the remaining material
from the bucket to empty. Use other lifting equipment to remove when the backhoe has damage.
CAUTION
Remove the backhoe on firm level ground. Do not allow other persons in the area.
Be careful to avoid injury during removal of the backhoe.
The hydraulic oil is dangerous for skin or eyes. Wash the skin and seek medical service if it
is necessary.
1. Move the tractor to backhoe storage place.
2. Use inner two levers to lower the stabilizers until they contact ground. Use the boom and dipperstick control
lever to raise the boom and dipperstick completely.
3. Center the boom and then lock the swing with lock pin.
4. Using the control levers, position the dipperstick vertically, curl the bucket until it’s bottom is level with the
ground then lower the boom until bottom of the bucket rests on the ground.
5. Remove pins that secure the backhoe.
6. Lower the backhoe mainframe to the ground by raising stabilizers and boom. Use the wood plate or block
if necessary.
7. Turn off the tractor engine, relieve hydraulic pressure by actuating all the control levers in each direction,
then disconnect the backhoe hose couplers from the tractor hydraulic couplers.