BE Ag & Industrial BE-BK Series, Руководство по эксплуатации и запасным частям

Страница: 8 / 33

TRACTOR PREPARATION BE-BKxx
Rear Counterweight
ROPS SYSTEM
The tractor must be equipped with an approved ROPS System to ensure adequate operator’s protection.
TRACTOR HYDRAULIC SYSTEM
The tractor operation in a backhoe application significantly increase demands on the tractor Hydraulic System.
Check the tractor Hydraulic system fluid level daily. Refer to your tractor Operator’s Manual maintenance
section for instructions regarding tractor hydraulic system maintenance.
Adhere to recommendation in your Tractor Operator’s Manual concerning hydraulic fluid and filter
specifications and change intervals.
TIRE INFLATION
Front tires must be maintained at the maximum recommended inflation to maintain normal tire profile with
the added weight of backhoe/material.
Rear tires must be maintained at equal pressure within the recommended tire inflation range. Unequal rear
tire inflation can prevent backhoe attachment from contacting the ground across its full width.
WHEEL TREAD SETTINGS
Tractor front wheel tread setting must be restricted to wheel tread spacing recommended in the tractor
Operator’s Manual.
WARNING
Do not exceed the manufacturer’s rating for maximum gross vehicle weight.
Refer to Operator’s Manual or ROPS serial plate provided with tractor.
Certain specific conditions may not permit safe use of backhoe at backhoe rating or may require
more careful restricted operation at the rated load.
WARNING
The tractor/backhoe must only be operated
with all safety equipment properly installed.