manualshive.com logo in svg

BayTech Telplex TX102, Руководство пользователя

Поделиться
Скачать
BayTech Telplex TX102 Скачать руководство пользователя страница 97

8 Channel Control Relay, 16 Channel Optical Isolated Input, 16 Channel
Switched Input, EIA-232/422 4 serial I/O ports, or EIA 485/422 4 serial
I/O ports.  System configuration and comprehensive data collection
functions are provided through module configuration menus.

Telplex Models TX102, TX104 and TX108

 are asynchronous

statistical multiplexers which multiplex and demultiplex two, four, or eight
communications channels over a single channel.  This single channel is
typically a telephone line or cable.  The 

Telplex TX24

, 

TX28

 and 

TX60

will multiplex and demultiplex up to 20, 28, and 60 ports respectively. 
The 

TX28

 and 

TX60

 support ethernet, taken ring, EIA-232, EIA-422,

V.35, and DDS communications.  A Telplex pair may be connected
using high speed asynchronous or synchronous modems or via cable up
to 4000 feet.  Telplex allows local and remote configuration and
diagnostics.  A terminal connected to a local Telplex may configure or
perform diagnostics on the local unit.  This same terminal may also
configure or perform diagnostics on a remote Telplex if there is a
communication link with the remote site.  You may use Telplex in point-
to-point, multiple location, daisy chained, or star configuration
applications.  The 

TX28

 and 

TX60

 allow for multiple composite modules

which offer simultaneous communications with multiple remote locations.

Telplex Model TX104M

 is an asynchronous statistical multiplexer with

built-in modem.  Four individual communications channels are
multiplexed into a single dial-up or leased telephone line, cutting phone
line costs to a minimum.  The TX104M features a V.22 bis internal
modem which provides reliable communication at speeds up to 4800
bps.  With V.42 bis protocol, the TX104M provides error correction and
Classes 2-4 data compression.  Compatible with most computers,
printers, or peripherals, the TX104M ensures rapid throughput, and
offers a variety of user-programmable features in order to meet your
specific application requirements.

The 

BX2448

 is a V.22 bis external modem which uses deal-up or

leased telephone lines and comes equipped with many advantageous
features, such as MNP Class 5 data compression, which enables data
transmission at speeds to 4800 bps and, MNP Classes 2 - 4 error
correction.  A wide selection of user-programmable features allows you
to customize the modem to your own individual application.

Содержание Telplex TX102




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды