BayTech Telplex TX102, Руководство пользователя

Страница: 65 / 99

59
59
Enter the desired string (up to 42 characters). If String 1 must include
control characters, use the prefix
^ (5E hex or ASCII 94) to represent the
Control key. For example, if you want the string to include Control-T , you
would enter ^T in response to the prompt along with the rest of the
desired string. The entry must be followed by the <ENTER> key.
NOTE: All AT commands require a Carriage Return at the end of the
command(s) before the modem will execute the command(s).
Therefore,
^M ( Control-M or Carriage Return ) should be the last
character entered in either programmable string.
For example, if you want the local unit to send String 1 to instruct the
external modem to tone dial the remote unit's external modem at number
1-555-123-4567 upon power-up or loss of DCD, you would first enter the
following string:
Enter Up to 42 Characters to be Sent for String: ATDT15551234567^M
The Telplex will respond with:
+--------+------------------------------------------+----------+
| String | Programmable String | Send On: |
+--------+------------------------------------------+----------+
| 1 | ATDT15551234567^M | Manual |
+--------+------------------------------------------+----------+
| 2 | | Manual |
+--------+------------------------------------------+----------+
String 1.......................1 String 1 Send On........3
String 2.......................2 String 2 Sent On........4
Enter request or X to Exit:
If you wish to change the condition on which String 1 will be sent out the
composite port, type "3" (String 1 Send On) in response to the prompt at
the end of the Programmable String submenu. The Telplex will respond
with:
1 For Power Up
2 For DCD Off
3 For Power/DCD
4 For Manual
Enter Request: