BayTech Telplex TX102, Руководство пользователя

Страница: 67 / 99

61
61
5.6 5.6 SET SERIAL PORT DESTINATION SET SERIAL PORT DESTINATION
NOTE: This section does not apply to standard units.
By responding to the Enter Request: message at the end of the main
configuration menu (see Section 5.1.1 ) with "5" (Set Serial Port
Destination), you may review the current remote destination status for all
terminal ports and make any necessary changes. When configuring this
option for a selected terminal port, you should know the unit, module, and
port number of the remote Telplex that you wish the selected port to
communicate with. The Telplex will respond with:
+------+--------------------+
| Port | Remote Destination |
| | Unit /Module/ Port |
+------+------+------+------+
| 1 | 1 | 1 | 1 |
| 2 | 1 | 1 | 2 |
| 3 | 1 | 1 | 3 |
| 4 | 1 | 1 | 4 |
+------+------+------+------+
Enter Port Number 1-4 or X to Exit
Type the desired port number followed by <ENTER>. For example, if
you type "1" and <ENTER> for Port 1, the Telplex will respond with:
Enter Destination Unit (1 to 32):
Enter the desired Destination Unit. This is the remote Telplex's Unit
Number. The Telplex will respond with:
Enter Destination Module (1 to 16):
Enter the desired Destination Module. If the remote Telplex is a TX102,
TX104, or TX108, type "1" for the Destination Module. If the remote
Telplex is a TX28 or TX60, the Destination Module will be 1 to 8 or 1 to
16 respectively. The Telplex will respond with:
Enter Destination Port (1 to 8):
Enter the desired Destination Port. This will be 1 or 2 for a remote
TX102, 1 to 4 for a TX104 or TX4, TX28 or TX60, or 1 to 8 for a TX108.