![background image](http://html1.mh-extra.com/html/bayrol/pool-relax-bromine/pool-relax-bromine_instruction-manual_2713055007.webp)
3
7
HAZARD!
Dangerous system settings
Changing the system settings (default values) can be dangerous under certain circumstances.
Potential consequence:
Severe or possibly fatal injury, serious damage to property.
Settings must be changed by trained technicians only.
The operator assumes liability if settings are used improperly or modified.
HAZARD!
Unexpected start
Pool Relax
starts operation as soon as there is voltage on the incoming power line. It is possible that dosing pumps start or that
add-on functions are turned on or switched.
Potential consequence:
Severe or possibly fatal injury, serious damage to property.
Be sure that Pool Relax is secured against unauthorised access.
Do not supply Pool Relax with power until all preparations for a safe start and safe operation have been completed.
HAZARD!
Potential overdosing of maintenance products
Despite Pool Relax comprehensive safety functions, it is possible that a sensor failure and other errors could lead to an overdosing
of maintenance products.
Potential consequence:
Severe or possibly fatal injury, serious damage to property.
Design your installation such that uncontrolled dosage is not possible in the event of a sensor failure or other errors, and/or
such that uncontrolled dosage is recognised and halted before damage is incurred.
HAZARD!
Gaseous chlorine produced from dosing in standing water if dosing outputs are not locked via the filter pump
If the flow switch is stuck or experiences another error, there is a risk of dosing into standing water. Poisonous chlorine gas can be
yielded when sodium hypochlorite and pH minus come together.
Potential consequence:
Severe or possibly fatal injury, serious damage to property.
Only run power to input L
D
[35] / N
D
[36] for the dosing outputs if circulation is running (dosing outputs must be locked via the
filter pump).
Connect power input L
D
[35] / N
D
[36] to the timer that controls the filter pump, or use the corresponding outlet on the filter
pump.
If Pool Relax is controlling the filter pump directly, then locking automatically occurs internally.
Please also refer to the Section 230V~ Power Supply.
HAZARD!
Use of non-BAYROL products
The use of other products such as hydrochloric acid to control the pH value can quickly result in serious damage.
Potential consequence:
Severe injury, serious damage to property.
The system must be operated with BAYROL products only.
BAYROL does not provide a guarantee or accept liability for problems caused by using other manufacturers' products.
HAZARD!
Damage of the touch screen
Any contact to the touch screen with objects such as pens, knives or nails may cause scratches or other damages of the surface.
Potential consequence:
Damage or failure of the touch screen.
Do not touch the screen of the device with anything else but the finger.
Use a soft cloth and a mild cleaner to clean the touch screen and remove
Any damage caused by misapplication will result in loss of warranty!