![background image](http://html1.mh-extra.com/html/bayrol/pool-relax-bromine/pool-relax-bromine_instruction-manual_2713055030.webp)
7
30
7.3
Login
If you want to enter the Main Menu (Customer) or the Main Menu (Service), you must login with the Customer Code or Service Code,
respectively. The default codes are indicated in the menu tree above.
If you have entered the correct code once, it remains valid for five minutes and you do not need to enter it again.
In the standard configuration, you must also login to the menus for the four switching functions (OUT1/2/3/4), which are located in the
“Mode of Operation / Switched Outputs” menu.
If you want to access these menus without login, you can change the following setting:
Main Menu (Service)
Alarm and Controller Settings
Controller Settings
Code Numbers
Switch Output Menu
Setting
Description
Service Code
You must login to the configuration menus for the switching functions with the Service Code.
Customer Code
You must login to the configuration menus for the switching functions with the Customer Code.
No Code
You can access all configuration menus for the switching functions without login.
7.4
Direct Menu Links in Home Menu
By touching in different areas of the Home Menu you can directly jump to several important menus:
Pos.
Direct Link
1
Direct links to the configuration menus of the individual measuring and control functions
(pH, mV (redox) or O2 (Bayrosoft
®
), temperature T)
2
Direct links to the “Operating Mode / Switched Outputs”,
where the different functions and devices can quickly be switched on or off.
3
Direct link to the alarm menu
4
Direct links to the configuration menus of the individual switching functions which are displayed in the Home Menu
Login with direct links
In the standard configuration, you must login by entering the Service Code, if you are using a direct link from the home menu. This
guarantees maximum security.
If you want to use the direct links without login, you can change the following setting:
Main Menu (Service)
Alarm and Controller Settings
Controller Settings
Code Numbers
Home Menu
Setting
Description
Service Code
You must login with the Service Code if you use a direct link in the Home Menu.
Customer Code
You must login with the Customer Code if you use a direct link in the Home Menu.
No Code
You can use all direct links in the Home Menu without login.