![background image](http://html1.mh-extra.com/html/bayrol/pool-relax-bromine/pool-relax-bromine_instruction-manual_2713055014.webp)
5
14
Installation of Pool Relax with pH-Plus
Important notice
Should pH-Plus be utilised for increasing the pH value instead of pH-Minus for reducing the pH value, the pH-Plus
may not be feed into the measurement cell, it must be fed directly into the circulating line.
You will require the following accessories (available at your BAYROL dealer):
100 509 PE hose (length depending on the installation situation)
171 207 Injection piece 0.5 bar (1 piece)
112 283 PVDF Plug screw (1 piece)
112 174 Saddle clamp 50mm ½“
or
112 148 Saddle clamp 63mm 1“ + 112 151 Adapter 1“-1/2“
or
112 149 Saddle clamp 75mm 1“ + 112 151 Adapter 1“-1/2“
(dependent on the pipe diameter of the circulation system in each case)
Installation:
If possible, fit the saddle clamp for the injection piece for pH-Plus directly in front of the return of the water to the pool, but after all
built-in parts (e.g. heat exchanger) into the circulation system.
Screw in the injection piece 171 207 into the threads of the saddle clamp. Ensure a secure sealing.
Remove the upper white PVDF elbow on the measurement chamber of the Pool Relax and instead screw in the PVDF plug screw
112 283 in the measurement chamber. Ensure a secure sealing.
Connect the PE hose 100 509 to the pressure side of the pH dosing pump of the Pool Relax. Run this hose in the most direct path
as possible to the injection piece. Do not run the hose over sharp edges and do not run it directly past heat-conducting pipes.
Ensure a secure and tight connection at pH dosing pump and injection piece.
Connect the suction line, which is located on the suction lance with the suction input (left connection) of the dosing pump.
Ensure that all connections are tight and securely fastened.
Installation example for Pool Relax Chlorine.
Pool Relax Chlorine
pH-Plus pressure line
(dosing directly into the
circulation line)
Measurement water return
Prefilter
Swimming pool
Chloriliquide pressure line
Measurement water intake
pH-Minus suction line
Chloriliquide suction line
Heat exchanger
Sand filter
Flockmatic
®
(optional)
Containers for pH-Plus and
Chloriliquide
Quickflock Automatic Plus
canister (optional)
Filter pump