Bayer HealthCare Rapidlab 800, Руководство оператора

Страница: 430 / 699

Use this procedure to select automatic printing, number of copies, and printer type
for the following reports:
patient sample reports
QC reports
calibration reports
You select options separately for each type of report. Table 5-9 lists the available
report printing options.
Roll Printer Lets you turn the roll printer on or off. When you turn the roll printer
off, it is off for all report types. The default is On.
Paper Spool Lets you turn the printer paper spool on or off. The default is On.
Copies Lets you select the number of copies the system prints automatically at
the end of analysis. The default is 1. Entry values are 1 – 3.
NOTE:
This option is available only when the roll printer is selected.
Auto Print Lets you control whether the system prints a report automatically at the
end of analysis. The default setting is On.
Printer Lets you select the printer (roll, line, and ticket) the system uses to print
reports. The default is roll printer.
You can select more than one printer, but you cannot select line printer
for calibration reports, or ticket printer for QC reports.
1. Access the Printing Options screen from the Menu screen:
a. Select
5 Operating Setup
and press
Enter
.
b. Select
7 Printing Options
and press
Enter
.
The Printing Options screen appears with the cursor in the Report frame, as
shown in Figure 5-10.