Bayer HealthCare Rapidlab 800, Руководство оператора

Страница: 370 / 699

BIOHAZARD: Refer to Appendix A, Protecting Yourself from Biohazards, for
recommended precautions when working with biohazardous materials.
1. Stop the system from the Menu screen:
a. Select
2 Maintenance
and press
Enter
.
b. Select
7 Stop System
and press
Enter
.
2. Open the measurement module door:
a. Push up the door latches located on the lower corners of the module door
and lift up the door.
b. Push the spring-loaded latch to the right.
Do not remove or return the sensors to the measurement module
without first discharging static buildup. Touch the inner surface of the module
frame to discharge static buildup.
3. Inspect the pO
2
and pCO
2
(gas) sensors for obstructions:
To avoid damage to the sensors, do not attempt to push the
clot-removal line through the gas sensors.
a. Remove the sensors and inspect the sample path for obstructions.
b. Place a piece of tubing, or use a capillary adapter, on the tip of a syringe.
Do not exert excessive pressure on the gas sensor membrane.
c. Place the syringe against the sensor sample path and inject air through the
sensor as shown in Figure 4-16.
!
Capillary Adapter
Syringe
Sensor
O-ring
2
Menu Code
7